Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Spring Repair Across Lawrence
If your garage door snapped and won’t lift, a broken torsion or extension spring is almost always the cause. Garage door spring repair in Lawrence typically costs $180 – $340 for a single spring, and matched pairs are usually replaced together for about twice that. We work on the older doors and hardware you’ll find across Lawrence every day – Genie, Clopay, Amarr, Wayne Dalton, and more – and our technicians have up to 8 years of experience with exactly this kind of legacy equipment. Call (877) 792-5986.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Lawrence Homeowners Call Haverhill Garage Door Repair Pros for Garage Door Spring Repair
Lawrence isn’t a town of new construction, and the spring work here reflects that. Much of the housing is late-19th- to early-20th-century mill-worker stock – three-deckers, two-families, and converted mill or outbuilding garages with small, low-headroom openings. The springs on those doors are often original or decades old, and the framing behind them is rough-sawn or old-growth lumber that’s frequently out of square. A straight spring swap on a brand-new door is simple. On a building like this, it usually isn’t.
That’s the job we’re built for. We diagnose rather than guess, and we work on the widest range of major brands – so whether your door is a Clopay sectional or an older Amarr, you don’t need a different specialist. We also offer emergency garage door service for the mornings when the door won’t open before work. Our technicians have up to 8 years of experience, and we speak honestly about repair versus replace: if a retrofit makes more sense than another repair, we’ll tell you.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Spring Repair Services in Lawrence
Springs are the most mechanically dangerous part of a garage door, and they’re the repair most often mishandled by generalists. If you need our garage door spring repair team, here’s what the work covers in Lawrence.
Torsion Spring Replacement
Most Lawrence sectional doors run a torsion spring on the header above the opening. When it breaks, the door won’t lift and the opener strains against dead weight. We fit a spring rated to the actual door weight, not the number printed on the old one, because a retrofit sometimes means replacing a spring that was undersized from the start.

Extension Spring Replacement
Older one-piece and early sectional doors often use extension springs running along the sides. We replace them as a matched set, sized to the door, and add safety cables so a failed spring is contained instead of flying loose.

Broken Spring Repair
A snapped spring is almost always a same-day call. We confirm the spring has run out its service cycles, then check cables, drums, and end bearing plates for corrosion before we replace anything – a spring alone rarely tells the whole story.

Safety Cable Installation
Safety cables through extension springs are a low-cost upgrade that matters on older hardware. We install them alongside a spring replacement and inspect the cable ends while the door is open.
Trusted Brands We Service in Lawrence
You don’t have to track down a dealer for the door that’s already on your house. We service Genie, Clopay, Amarr, Wayne Dalton, LiftMaster, Chamberlain, Craftsman, and Raynor equipment. If your opener is a Genie and your door is an older Wayne Dalton, we handle both in one visit. We don’t stock parts locally; we identify what’s needed and follow up with a fast turnaround. Eight brands, one call.
Common Garage Door Spring Repair Problems We See in Lawrence Homes
- Original springs on mill-worker-era garages snapping after years of freeze-thaw. Lawrence sits in the Merrimack Valley with cold, snowy winters, so springs on three-decker and outbuilding garages cycle hard and fail. The opener is often left straining against a door whose springs no longer carry its weight.
- Salt-corroded cables, drums, and hinges on street-facing garages. Road salt from plowed alleys eats into steel hardware, so a spring replacement can turn into a cable and hardware job once the assembly is opened up.
- Out-of-square or Sawzall-widened openings. In the dense blocks off Broadway, garages are reached through narrow shared driveways and tight alleys, and techs sometimes find an opening a previous owner widened with no header sized for it.
- Rot-softened framing behind the spring. Where old-growth or rough-sawn end bearing plates have gone soft, new springs and drums can’t be bolted to framing without repair first.
See the difference
Before
After
Before
After
Before
AfterWhen a Spring Repair Can’t Stop at the Spring
This is the part that separates a Lawrence spring job from the same repair almost anywhere else. Because so much of the garage stock here is mill-era outbuildings and three-decker garages with non-standard, often out-of-square openings, the spring repair frequently can’t stop at the spring. The end bearing plates and drums have to be mounted to framing that a modern torsion assembly was never designed to sit on. Rough-sawn or old-growth lumber true to the original build, out of square, sometimes swollen or rotted at the base from years of freeze-thaw cycling – that’s what the hardware bolts into. So the job becomes: size the spring to the real door weight, check the cables and drums for salt corrosion, confirm the header is square and sound, and repair the framing before bolting on a torsion assembly that would otherwise work loose. On a cold Merrimack Valley morning, that scenario plays out with a legac one-piece or early sectional door: the owner pulls it up, the torsion spring snaps with a bang, and the opener grinds against a door it was never meant to lift. A qualified local pro confirms the spring is out of cycles, inspects the cables, drums, and end bearing plates, checks the header for rot and square, then fits a correctly rated spring sized to the actual door weight rather than the label on the old one.
Pricing for Garage Door Spring Repair in Lawrence, MA
Spring repair for one spring in Lawrence typically runs $180 – $340. A matched pair is usually replaced together, so a pair costs about twice that range. Here’s how the numbers break down for the common repairs that come up once the assembly is opened:
| Service | Typical Estimated Range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| Garage Door Repair | $150 – $600 |
What moves you up or down the range: spring type and cycle rating, door weight, whether cables and drums need replacing, and whether the framing behind the spring needs repair. Those are estimates, and the written estimate we give you sets the final price – quoted and agreed before any work starts. Estimates are free. Call (877) 792-5986. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We Also Serve Cities Near Lawrence
We serve Lawrence and the surrounding Merrimack Valley, including Lawrence itself, Methuen Town, North Andover, Haverhill, and Groveland. Same older housing stock, same cold winters – call and we’ll confirm the details for your address.
Serving Lawrence, MA – Our Local Coverage Area
We serve Lawrence and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Spring Repair in Lawrence
Often the spring can be repaired, but on an old one-piece door it’s worth weighing a retrofit. If the opening is out of square or the framing behind the spring is soft, repairing the spring alone may not hold; we’ll tell you which actually makes sense, and the estimate is free. Call (877) 792-5986.
Your springs have lost their lift, so the opener is carrying the full door weight instead of the springs. In Lawrence’s cold winters, freeze-thaw cycling weakens old springs fast; the fix is usually a correctly rated replacement, not a new opener. Call for a free estimate.
Yes. We add safety cables with extension spring replacement and inspect the cable ends while the door is open. On older hardware it’s a small upgrade that matters. Call (877) 792-5986 to book it.
Yes. We plan for tight access in the dense blocks off Broadway and the old mill neighborhoods. The replacement has to fit the opening, not the other way around. Call to confirm the access at your address.
We can explain the work bilingually to owner-occupants and landlords in the same visit, so everyone involved understands what’s being replaced and why. Call (877) 792-5986 and we’ll walk through the estimate together.
When the door won’t move, we move fast. Whether you’re an owner-occupant on a three-decker or a landlord managing an old mill outbuilding, call (877) 792-5986 for a free estimate on garage door spring repair in Lawrence. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the price, and no work starts until you agree to it.
Written by the team at Haverhill Garage Door Repair Pros.